HP ZBook 15 Mobile Workstation - Manual (Page 64)

Removing the hard drive
To remove a hard drive:
1. Save your work.
2. Shut down the computer and close the display.
3. Disconnect AC power and all external hardware devices from the computer.
4. Turn the computer upside down on a flat surface.
5. Remove the battery. (See Replacing a user-replaceable battery (select models only)
on page 41 ).
6. Loosen the 3 hard drive screws (1). Pull the hard drive tab (2) to the left to disconnect the hard
drive.
7. Lift the hard drive (3), and then pull the hard drive out of the hard drive bay.
Installing a hard drive
NOTE: Your computer may look slightly different from the illustration in this section.
To install the hard drive:
1. Insert the hard drive into the hard drive bay (1) at an angle, and then lower the hard drive into
the hard drive bay.
54 Chapter 8 Drives