HP LaserJet 4050 Printer series - Manual (Page 55)

EN
Chapter 2: Printing Tasks 33
Printing to the Rear Output Bin
The printer always prints to the rear output bin if it is open. Paper
comes out of the printer face-up, with the last page on top.
To open the rear output bin, grasp the handle at the top of the bin.
Pull the bin down, and slide out the extension.
Printing from Tray 1 to the rear output bin provides the straightest
paper path. Opening the rear output bin might improve output quality
with the following:
•
envelopes
•
labels
•
small custom-size paper
•
postcards
•
paper heavier than 28 lb (105 g/m
2
)
Note Opening the rear output bin disables the optional duplexer (if
installed) and the top output bin.
Figure 7 Rear Output Bin