HP LaserJet 4050 Printer series - Manual (Page 136)

114 Chapter 4: Problem Solving
EN
Mopy Disk Error Messages
The following table lists the disk error numbers reported on either
the Printer Collation or Job Storage Disk Error page, which is printed
when an error exists. Use the HP Resource Manager for
management of the disk (see page 25).
Mopy Disk Error Messages
Disk
Error
Number
Error Description Solution
1 Disk volume not present – it
may be uninitialized. • Hard disk: Initialize the hard disk. If problem
persists, replace the hard drive.
• RAM disk: Power cycle the printer.
3 A file or directory asked for
could not be found. • Possible data corruption, delete the job the
error occurred with.
5 Invalid # of bytes given in a
read/write request. • Possible data corruption, delete the job the
error occurred with.
6 Attempt to create a file or
directory that already exists. • The user has sent a username that is the
same as an existing directory. Change the
username in the driver and resend the job.
15 Bad Disk • Hard disk: Initialize the hard disk. If problem
persists, replace the hard drive.
16 No volume label • Hard disk: Initialize the hard disk. If problem
persists, replace the hard drive.
23 Bad seek request – the
resulting offset would be
negative. • Possible data corruption, delete the job the
error occurred with.
24 Unexpected internal error • Possible data corruption, delete the job the
error occurred with.
• Disk media problem – initialize the hard disk
or reboot to reinit the RAM disk.
• If the problem persists on a hard drive,
replace the hard drive.
55 Bad file system • Possible data corruption, delete the job the
error occurred with.
• Disk media problem – initialize the hard disk
or reboot to reinit the RAM disk.
• If the problem persists on a hard drive,
replace the hard drive.
56 Hardware failure • Replace the hard drive.