HP EliteBook 2170p Notebook PC - Manual (Page 54)

Replacing the service door
Replace the service door after accessing the memory module slot, hard drive, and other components.
To replace the service door:
1. Tilt down the service door down (1) to align the front edge of the service door near the front edge
of the computer.
2. Insert the alignment tabs on the rear edge of the service door with the notches on the computer.
3. Slide the service door toward the battery bay (2) until the service door snaps into place.
4. Tighten the screws (3) to secure the service door.
5. Insert the battery (see Inserting or removing the battery on page 36 ).
44 Chapter 7 Drives