HP EliteBook 2170p Notebook PC - Manual (Page 53)

Removing or replacing the service door
CAUTION: To prevent information loss or an unresponsive system:
Save your work and shut down the computer before adding or replacing a memory module or hard
drive.
If you are not sure whether the computer is off or in Hibernation, turn the computer on by sliding the
power switch. Then shut down the computer through the operating system.
Removing the service door
Remove the service door to access the memory module slot, hard drive, and other components.
To remove the service door:
1. Remove the battery (see Inserting or removing the battery on page 36 ).
2. Loosen the 2 screws (1).
3. Slide the service door toward the front of the computer (2) and lift (3) to remove it.
Removing or replacing the service door 43