HP Brocade 16Gb SAN Switch for HP BladeSystem c-Class - Manual (Page 33)

Weight and physical dimensions
nl Table 12 (page 33) lists physical properties.
Table 12 16Gb SAN Switch physical dimensions
Measurement Dimension
27.94 mm (1.1 in) Height
192.84 mm (7.59 in) Width
269.46 mm (10.6 in) Depth
1.49 kg (3.3 lb) without media Weight
Environmental requirements
To ensure proper operation, the switch must not be subjected to environmental conditions beyond
those for which it was tested. The ranges specified in
Table 13 (page 33) list the acceptable
environment for both operating and nonoperating conditions.
Table 13 Environmental requirements
Acceptable range during non-operation Acceptable range during operation Condition
Non-operating -30° to 60°C (-22° to
140°F). Maximum rate of change is
20°C/Hr (36°F/Hr). 10° to 35°C (50° to 95°F) at sea level
with an altitude derating of 1.0°C per
every 305m (1.8°F per every 1000ft) Ambient
temperature
above sea level to a maximum of 3050m
(10,000ft), no direct sustained sunlight.
Maximum rate of change is 10°C/Hr
(18°F/Hr ). The upper limit may be limited
by the type and number of options
installed. System performance may be
reduced if operating with a fan fault or
above 30°C (86°F).
5% to 95% relative humidity,
non-condensing 10% to 90% relative humidity,
non-condensing Humidity
0 to 30,000 ft (9144 m) above sea
level 0 to 10,000 ft (3 km) above sea level Altitude
140 G, 2ms 40 G, 2ms duration Shock
2.0 G, 5–500 Hz 1 G, 10–500 Hz Vibration
Supported SFPs
Do not use unsupported SFPs. They may not fit correctly and may void your warranty. Any port
with an unsupported SFP will automatically be disabled by switch firmware, leaving the port
non-operational. See
Supported SFP transceiver options (page 8) for a list of supported SFPs.
For a complete list of supported devices, see the latest version of the HP SAN Design Reference
Guide at the HP website:
nl http://h18000.www1.hp.com/products/storageworks/san/documentation.html .
Supported HBAs
For a list of HBAs that have been tested and are known to work with the SAN switches, see the
latest version of the HP SAN Design Reference Guide at the HP website:
nl http://h18000.www1.hp.com/products/storageworks/san/documentation.html .
Weight and physical dimensions 33