beautypg.com

Setting the date and time, Verifying installed licenses – HP Brocade 16Gb SAN Switch for HP BladeSystem c-Class User Manual

Page 16

background image

3.

Enter the user name, using the administrative account admin.

4.

Enter the password. The default password is password.

NOTE:

You can run up to two simultaneous admin sessions and four user sessions.

If you have not changed the system passwords from the default, you are prompted to change
them. Enter the new system passwords, or press Ctrl+c to skip the password prompts.

5.

Verify that the login was successful. If successful, the prompt displays the switch name and
user ID to which you are connected.

Setting the date and time

The date and time are used for logging events. The operation of the 16Gb SAN Switch does not
depend on the date and time; a switch with an incorrect date and time value functions properly.

To set the date and time using the CLI:
1.

If you have not already done so, connect to the switch and log in as admin as described in

Connect to the Command Line Interface (page 15)

.

2.

Issue the date command using the following syntax:

date mmddHHMMyy

where:

mm

is the month; valid values are 01 through 12.

dd

is the date; valid values are 01 through 31.

HH

is the hour; valid values are 00 through 23.

MM

is minutes; valid values are 00 through 59.

yy

is the year; valid values are 00 through 99 (values greater than 69 are interpreted

as 1970–1999, and values less than 70 are interpreted as 2000–2069).

For example:

switch:admin> date
Fri Jan 29 17:01:48 UTC 2000
switch:admin> date 0227123003
Thu Feb 27 12:30:00 UTC 2003
switch:admin>

For details about changing time zones, see the tsTimeZone command in the latest version
of the Fabric OS Command Reference Guide.

Verifying installed licenses

To determine the type of licensing included with your 16Gb SAN Switch , enter licenseshow
at the command prompt, as in the following example:

nl

switch:admin> licenseshow

nl
nl

XXXnnXXnXnnXXX:

nl
nl

Fabric Watch license

nl
nl

Release v5.0 license

nl

nl

XXXnnXXnXnnXXX:

nl

nl

Zoning license

nl
nl

XXXnnXXnXnnXXX:

nl

nl

Web license

nl

nl

XXXnnXXnXnnXXX:

nl

nl

Full Fabric

16

Setup