Copy troubleshooting – HP Deskjet F4210 All-in-One Printer User Manual
Page 121

covering the ink nozzles, carefully remove the tape from the print cartridges. Do not
touch the ink nozzles or the copper-colored contacts.
1 Copper-colored contacts
2 Plastic tape with pink pull tab (must be removed before installing)
3 Ink nozzles under tape
For more information, see:
“Replace the print cartridges” on page 64
Cause: The protective plastic tape was only partially removed from the print
cartridge.
Ink is spraying the inside of the HP All-in-One when I print a photo
Solution: Make sure you load photo paper in the input tray before you print a
borderless print job.
Cause: The borderless print settings require photo paper to be loaded in the input
tray. You are using the wrong paper type.
Copy troubleshooting
Use this section to solve these copy problems:
•
Nothing happens when I try to copy
•
Parts of the original do not appear or are cut off
•
The printout appears enlarged on the page
•
•
A borderless copy has white space around the edges
Copy troubleshooting
119
Trou
bles
ho
ot
ing