beautypg.com

Single-domain example – HP D3000 Disk Enclosures User Manual

Page 42

background image

Single-domain example

This example illustrates cabling for a single-domain configuration. In this configuration, note the
following:

DP1 on the disk enclosure I/O module is treated as the SAS “in” port.

DP2 on the disk enclosure I/O module is treated as the SAS “out” port.

In single-domain configurations, one cable path is created between the host, the primary disk
enclosure, and additional cascaded disk enclosures. (Shown)

In dual-domain configurations, two cable paths are created between the host, the primary
disk enclosure, and additional cascaded disk enclosures.

42

Cabling examples