Installing a new roll on the printer – HP Designjet 510 Printer series User Manual

Page 35

Text mode
Original mode

Installing a new roll on the printer

The

graphical sequence

shows how to install a new roll of paper on the printer.

CAUTION:

Make sure the printer wheels are locked (the brake lever on each wheel is pressed Down) to
prevent the printer from moving.

If you are a regular user of different types of roll paper, you can change the paper quicker if you have more than
one spindle. This allows you to do the following:

1. Pre-load the different types of paper onto the spindles.

2. Remove and replace the spindle with the new type of paper.

NOTE:

Additional spindles are available from Hewlett-Packard as accessories.