HP LASERJET PRO P1102w - Manual (Page 109)

Toner smear
● If toner smears appear on the leading edge of the
media, the media guides might be dirty. Wipe the media
guides with a dry, lint-free cloth.
● Check the media type and quality.
● The fuser temperature might be too low. In the printer
driver, make sure the appropriate media type is selected.
● Try installing a new genuine HP print cartridge.
Loose toner
● The fuser temperature might be too low. In the printer
driver, make sure the appropriate media type is selected.
● Clean the inside of the product. See Clean the product
on page 71 .
● Check the media quality.
● Plug the product directly into an AC outlet instead of into
a power strip.
Vertical repetitive defects
● The print cartridge might be damaged. If a repetitive
mark occurs at the same spot on the page, install a new
genuine HP print cartridge.
● The internal parts might have toner on them. If the defects
occur on the back of the page, the problem probably
will correct itself after a few more printed pages.
● In the printer driver, make sure the appropriate media
type is selected.
Misformed characters
● If characters are improperly formed, producing hollow
images, the media stock might be too slick. Try a
different media.
● If characters are improperly formed, producing a wavy
effect, the product might need service. Print a
configuration page. If the characters are improperly
formed, contact an HP-authorized dealer or service
representative.
ENWW Solve image-quality problems 95