HP Cisco MDS 8Gb Fabric Switch for HP BladeSystem c-Class - Manual (Page 32)

32 A Technical Specifications
Weight and physical dimensions
Table 7 lists physical properties.
Table 7 Physical dimensions
Environmental requirements
To ensure proper operation, the switch must not be subjected to environmental conditions beyond those
for which it was tested. The ranges specified in Table 8 on page 32 list the acceptable environment for
both operating and non-operating conditions.
Table 8 Environmental requirements
Supported SFPs
Do not use unsupported SFPs; they can affect switch operability. They may not fit correctly and may void
your warranty. See ” Optional hardware ” on page 10 for a list of supported SFPs.
For a complete list of supported devices, see the HP StorageWorks Single Point of Connectivity
Knowledge (SPOCK) website at
http://www.hp.com/storage/spock
You must sign up for an HP Passport to be granted access.
Supported HBAs
For a list of HBAs that have been tested and are known to work with the SAN switches, see the HP
StorageWorks Single Point of Connectivity Knowledge (SPOCK) website at
http://www.hp.com/storage/spock.
You must sign up for an HP Passport to be granted access.
Dimension Measurement
Height 29.3 mm (1.15 in)
Width 208 mm (8.19 in)
Depth 280 mm (11.02 in)
Weight 1.27 kg (2.8 lb)
Condition Acceptable range during operation Acceptable range during
non-operation
Ambient temperature 104°F/40°C at sea level, derated
34°F/1°C per 1000 ft above sea
level
-40°F/-40°C to 58°F/70°C with
maximum rate of change of
68°F/20°C /hr
Humidity 5% to 90% relative humidity,
non-condensing
50% to 80% relative humidity,
non-condensing
Altitude 0 to 10,000 ft (3 km) above sea
level
0 to 40,000 ft (12 km) above sea
level
Shock 40 G, 2mS duration 140 G, 2mS duration
Vibration 0.5 G, 10 to 500 Hz 2.0 G, 5 to 500 Hz
Airflow 47 cubic ft per minute None required