HP Deskjet 6988dt Printer User Manual
Page 38
3.
Press the SES button twice (two presses within 3 seconds). The wireless radio (and
the
) will turn on and stay on.
4.
Close the top cover.
Note
Ad hoc connections are now possible if the printer's wireless radio is in ad
hoc mode. Press the Report Page button and verify on the HP Report page that
the communication mode is ad hoc, the network name (SSID) is hpsetup, and
the IP address is something other than 0.0.0.0. If not in ad hoc mode, you
must
reset the printer to the factory
Turn radio off
Follow these steps to turn off the wireless radio:
1.
Verify the printer is powered on and idle, and that the
illuminated.
2.
Open the top cover of the printer.
3.
Press the SES button twice (two presses within 3 seconds). The wireless radio (and
the
) will turn off.
4.
Close the top cover.
Note
Although now off, the radio is still enabled and can turn on automatically,
for example during software installation.
HP Report page
The HP Report page supplies useful information about the printer's
, and
connections.
Print an HP Report page
To print an HP Report page, verify that the printer is powered on and idle, and then press
the Report Page button once.
If the printer has just been connected to a network, wait a few minutes before printing
the HP Report page to allow the printer to obtain valid settings.
Chapter 4
36
HP Deskjet 6980 series