HP Smart Array P830 Controller - Manual (Page 10)

Specifications 10
compatible with HP key manager products and can operate with or without the presence of a key manager
in the environment, depending on individual customer settings.
HP Secure Encryption provides encryption for data at rest as an important component for complying with
data privacy requirements found in government regulations like HIPAA and Sarbanes-Oxley. HP Secure
Encryption secures any data deemed sensitive and requiring extra levels of protection through the
application of XTS-AES 256-bit data encryption. Many companies under government regulations require that
sensitive privacy data must be secured and uncompromised using NIST-approved algorithms and
methodologies for key management. As a result, HP has applied for FIPS-140-2 Level 2 validation for HP
Smart Array P830 Controller. For more information, see the Implementation Guidance for FIPS PUB 140-2
and the Cryptographic Module Validation Program on the National Institute of Standards and Technology
website (
http://csrc.nist.gov/groups/STM/cmvp/documents/fips140-2/FIPS1402IG.pdf ).
For more information about HP Secure Encryption, see the HP Secure Encryption Installation and User Guide
on the HP website ( http://www.hp.com/go/smartstorage/docs ).
Supported servers
For more information on installing the controller in a supported server, see the server user guide.
For the latest support information, see the controller QuickSpecs on the HP website
( http://www.hp.com/go/productbulletin ).
Controller specifications
Feature Description
Controller
Board type Full-height, 1/2 length, PCIe stand-up board
Dimensions, cm* 16.8 x 11.1 x 1.8
Dimensions, in* 6.6 x 4.4 x 0.7
I/O connection to
the system board
PCIe3 x8 edge connector
Maximum power
required
(approximate)
14.5 W
Internal SAS
connector life
expectancy
250 connect/disconnect cycles
Cache module and
battery
Cache module 4 GiB FBWC
Approximately 200 MB from the cache module is required
to run the controller firmware. The remainder of the
available space can be configured for read-ahead or write
back caching.
Time required to
recharge battery 5 minutes or less