HP Bluetooth Pendant Headphones - Manual (Page 12)

3 Charging the Bluetooth audio adapter
and Bluetooth receiver
Before you can use the headphones, you must charge both the Bluetooth audio adapter and the
Bluetooth receiver. They can be charged using a USB port on your computer or using the AC adapter
(select models only).
To charge the Bluetooth audio adapter and Bluetooth receiver, complete the following steps:
CAUTION: When removing the USB charging cable from a device, prevent damage to cable
connectors by grasping each connector and then pulling gently. Do not pull on the cable to remove it
from the device.
1. Be sure that the Bluetooth audio adapter and Bluetooth receiver are turned off.
If the status lights are off, the Bluetooth audio adapter and Bluetooth receiver are turned off.
2. Plug one of the two Mini-USB connectors into the Mini-USB port on the Bluetooth receiver (1).
3. Plug the other Mini-USB connector into the Mini-USB port on the Bluetooth audio adapter (2).
8 Chapter 3 Charging the Bluetooth audio adapter and Bluetooth receiver