HP Insight Diagnostics Software - Manual (Page 15)

Starting from an HP Documentation CD
On an HP business PC or HP workstation, start HP Insight Diagnostics Offline Edition from
either the HP Documentation CD or the HP Documentation and Diagnostics CD:
1.
Insert the CD into the optical drive.
2. Shut down the operating system, and power off the computer.
3. Power on the computer. The system boots to the CD.
If the system does not boot to the CD in the optical drive, you might need to change the boot
order in the Computer Setup (F10) utility so that the system boots to the optical drive before
booting to the hard drive. For more information, see the Computer Setup (F10) Utility Guide
on the Documentation CD.
4. Do one of the following:
•
To operate in Safe mode, press the Y key.
• To operate in Regular mode, press any other key.
Regular mode is the default mode if a key is not pressed within the specified time. If
the screen remains blank after booting into Regular mode, reboot the server and press
the Y key to boot into Safe mode.
5. Select the appropriate language, and then click Continue.
6. Click Agree at the End User License Agreement.
Starting the Offline Edition 15