On the backup host – HP 3PAR Application Software Suite for Oracle User Manual
Page 92
4.44
Recovery Manager Configuration Files
Recovery Manager for Oracle User’s Guide
◆
Enter Secondary/Remote InServ's user name [h=help,q=quit]?
You will only be prompted with this question if you previously selected SSH as the
remote shell.
Recovery Manager requires that a 3PAR InForm user must have been created on the
Secondary/Remote InServ Storage Server to allow access from the backup host.
◆
Enter 3PAR password file on backup host [h=help,q=quit]?
You will only be prompted with this question if you previously selected RSH as the
remote shell.
Recovery Manager requires that a 3PAR password file must have been created on the
backup host to allow access to the Secondary/Remote InServ Storage Server from the
backup host.
4.9.2.2 Creating a Recovery Manager Configuration File using the GUI
on the Backup Host
To use the Recovery Manager GUI to create a Recovery Manager configuration file with
Remote Copy support, perform the following:
1
Start the Recovery Manager GUI on the backup host.
a
Ensure the X11 server is running on the destination host where the GUI is displayed. If
the X11 server is not running, enter the following command:
b
Ensure the
DISPLAY
environment variable is set.
c
Start the Recovery Manager GUI.