HP 3PAR Application Software Suite for Oracle - Manual (Page 91)

4.43 Recovery Manager Configuration Files
Recovery Manager for Oracle User’s Guide
This question is for backwards compatibility. Provide the Remote Copy group name for
the archive log destinations if it is being used. Press ‘s’ to skip it if there is no such
group.
◆ Enter Secondary/Remote InServ name [h=help,q=quit]?
Enter the system name of the Secondary/Remote InServ Storage Server that is connected
to the backup host. The InServ Storage Server name can be retrieved from the output of
the InForm CLI showsys command.
◆ Enter remote copy target name on remote/secondary InServ [h=help,q=quit]
Enter the Remote Copy target name defined on the secondary/remote InServ Storage
Server.
◆ Enter InServ hostname (from showhost output) of the backup host
[h=help,q=quit]?
The InServ Storage Server’s hostname of the backup host can be retrieved from the
output of the InForm CLI showhost command on the secondary/remote InServ Storage
Server.
The InServ Storage Server’s hostname of the backup host may not be the same as the
DNS hostname of the backup host.
Press ENTER to accept the default value, otherwise, provide the correct hostname defined
in the InServ Storage Server.
◆ Enter Primary/Local InServ's user name [h=help,q=quit]?
You will only be prompted with this question if you previously selected SSH as the
remote shell.
Recovery Manager requires that a 3PAR InForm user must have been created on the
primary/local InServ Storage Server to allow access from the primary host to the
primary/local InServ Storage Server.
◆ Enter 3PAR password file on primary host [h=help,q=quit]?
You will only be prompted with this question if you previously selected RSH as the
remote shell.
Recovery Manager requires that a 3PAR password file must have been created on the
primary host to allow access to the Primary/Local InServ Storage Server from the primary
host.