Calibrating print quality, Automatically cleaning the print cartridges, Viewing estimated ink levels – HP Deskjet 5740 Color Inkjet Printer User Manual
Page 64
Chapter 9
Calibrating print quality
Perform a print quality calibration if light or dark horizontal lines appear in photos that
are printed with the tri-color and black print cartridges.
Before performing a print quality calibration,
, and then reprint
the document. If the lines still occur, perform a print quality calibration.
Follow these steps to calibrate print quality:
1
Load Letter or A4 plain, white paper in the In tray.
2
Verify that both a black and a tri-color
are installed in the printer.
3
Open the
.
4
Select the Calibrate Print Quality panel.
5
Click Calibrate, and then follow the onscreen instructions.
Automatically cleaning the print cartridges
If your printed pages are missing lines or dots, or if they contain ink streaks, the print
cartridges might be
or might need to be cleaned.
If the print cartridges are not low on ink, follow these steps to clean the print cartridges
automatically:
1
Open the
.
2
Select the Clean panel.
3
Click the Clean button, and then follow the onscreen instructions.
If your documents are still missing lines or dots after cleaning,
Caution
Clean print cartridges only when necessary. Unnecessary cleaning
wastes ink and shortens the life of the cartridge.
Viewing estimated ink levels
Follow these instructions to view the estimated ink levels of the print cartridges that are
installed in the printer:
1
Open the
.
2
Select the Ink Level panel.
If you need to replace a print cartridge, select the Supplies panel on the HP Inkjet
Toolbox. It contains information about the print cartridges that are used in your printer.
HP Deskjet 5700 Series
62