HP StorageWorks 8B FC Entry Switch - Manual (Page 16)

3-2 ISL Trunking User’s Guide
Using ISL Trunking
3
ISL Trunking Telnet Commands
The following table shows the telnet commands used to manage the ISL Trunking feature.
For detailed information on how to use these commands, refer to the Fabric OS Reference Guide.
Table 3-1 ISL Trunking Telnet Commands
Telnet Command Description Example
portCfgTrunkport Use this command to
configure a port to be
enabled or disabled for
ISL Trunking. To enable port 5 for ISL Trunking,
enter:
portCfgTrunkport 5, 1
To disable port 5 for ISL Trunking,
enter:
portCfgTrunkport 5, 0
switchCfgTrunk Use this command to
enable or disable
trunking on all ports of a
switch. To enable ISL Trunking on all ports of
a switch, enter:
switchCfgTrunk 1
To disable ISL Trunking on all ports
of a switch, enter:
switchCfgTrunk 0
trunkDebug Use this command to
debug a trunk link
failure. To debug ports 1 and 2, enter:
trunkDebug 1, 2
trunkshow Use this command to
display ISL Trunking
membership
information. To display ISL Trunking membership
information about users, enter:
trunkshow