HP ProLiant BL2x220c G5 Server-Blade - Manual (Page 35)

Hardware options installation 35
11. Remove the thermal interface protective cover from the heatsink.
CAUTION: Heatsink retaining screws should be tightened in diagonally opposite pairs (in an
"X" pattern).
IMPORTANT: When installing the heatsink, align the guide pins on the processor retention
bracket with the alignment holes in the heatsink.
12. Install the heatsink.
CAUTION: Route the cache module battery cables so that they do not become pinched when
the server B assembly is installed.
13. Install the server B assembly (" Install server B assembly " on page 15 ).
14. Install the server blade (" Installing a server blade " on page 19 ).