Installing a hard drive – HP ProBook 4446s Notebook-PC User Manual
Page 59

Installing a hard drive
1.
Insert the hard drive into the hard drive bay.
2.
Pull the plastic tab on the hard drive (1) towards the center of the computer to engage the hard
drive with the connector.
3.
Replace the four hard drive screws (2).
4.
Replace the service door (see
Removing or replacing the service door on page 45
).
5.
Replace the security screw, if desired (see
Using the optional security screw on page 44
6.
Replace the battery (see
Inserting or removing the battery on page 37
7.
Turn the computer right-side up, and then reconnect AC power and external devices to the
computer.
8.
Turn on the computer.
Replacing or upgrading the hard drive
49
This manual is related to the following products: