HP ProLiant ML310 G5p Server - Manual (Page 39)

Hardware options installation 39
4. Remove the expansion slot cover.
CAUTION: To prevent improper cooling and thermal damage, do not operate the server unless
all expansion slots have either an expansion slot cover or an expansion board installed.
Installing expansion boards
CAUTION: To prevent damage to the server or expansion boards, power down the server and
remove all AC power cords before removing or installing the expansion boards.
1. Power down the server (on page 16 ).
2. Unlock the bezel (on page 17 ).
3. Remove the access panel (on page 18 ).
4. Remove the expansion slot cover (" Removing the expansion slot cover " on page 38 ).
5. Install the expansion board, and press firmly to seat the board in the connector.