Setting the write-protect switch, Figure 4-4, Write-protect switch – HP NonStop G-Series User Manual
Page 50
Cartridge Information
SL500 (M852x) Tape Library Installation and User’s Guide — 541531-002
4 -6
Setting the Write-Protect Switch
Setting the Write-Protect Switch
You can set the write-protect switch so the cartridge is write enabled. To write-enable
the tapes, slide the switch to reveal the open lock symbol . In this position, the tape
drive can write as will as read data. This setting is recommended when inserting
cartridges into the tape library.
You can set the write-protect switch so that the cartridge is read only. Slide the switch
to reveal the symbol of a closed lock. In this position, the tape drive can only read data
from the tape but cannot write data to it.
Figure 4-4. Write-Protect Switch
1. Write-protect switch (Data cartridge has red switch. Cleaning cartridge has gray switch.)
2. Write-enabled
3. Write-protected