Rj-45 pin specification, Standard rj-45 receptacle/connector – HP ProLiant xw460c Blade Workstation User Manual
Page 46
RJ-45 pin specification 46
RJ-45 pin specification
In this section
Standard RJ-45 receptacle/connector ....................................................................................................... 46
Standard RJ-45 receptacle/connector
When connecting the switch to a switch, bridge, or hub, an Ethernet cable is necessary.
The table indicates the pin number and wire color assignments for the switch-to-network adapter card
connection, and the Ethernet cable for the switch-to-switch, switch-to-hub, or switch-to-bridge connection.
Contact
Media direct interface signal
Color match
1
Tx + (transmit)
White/Orange
2
Tx - (transmit)
Orange/White
3
Rx + (receive)
White/Green
4 Not
used
Blue/White
5 Not
used
White/Blue
6
Rx - (receive)
Green/White
7 Not
used
White/Brown
8 Not
used
Brown/White
The table provides the same information for the Gigabit over Copper ports.
Contact
Media direct interface signal
Color match
1 BI_DA+
White/Orange
2 BI_DA-
Orange/White
3 BI_DB+
White/Green
4 BI_DC+
Blue/White
5 BI_DC-
White/Blue
6 BI_DB-
Green/White
7 BI_DD+
White/Brown
8 BI_DD-
Brown/White