HP ProLiant xw460c Blade Workstation - Manual (Page 19)

Installing the switch 19
Installing the switch
CAUTION: Do not cable the switch until after configuration.
IMPORTANT: Make sure that the server NIC configuration matches the switch bay selected.
NOTE: When installing two switches, there are two switch interconnect ports between adjacent I/O bays.
These ports (17 and 18) are disabled by default. The ports must be manually enabled to use.
To install the switch:
1. Remove the blank.
2. Install the switch.
Accessing the switch
The switch is accessed remotely using the Ethernet ports or locally using the DB-9 management serial port.