HP Lights-Out 100 Remote Management - Manual (Page 22)

22 HP ProLiant DL145 Lights-Out 100i Remote Management User Guide
Controlling server power through the CLI
1. Log into the remote management processor CLI as described in the "Logging
in to the remote management processor (on page 13 )" section.
2. At the command prompt, enter one of the following commands:
−
power on— Powers on the server
−
power off— Powers off the server
−
reset warm— Resets the server
−
reset cold— Powers off the server and resets the server after a short
time has elapsed
Using the system event log
The system event log lists a short description of each system event. Events that
are recorded include system resets, system power loss, user logins, and
unsuccessful login attempts.