HP Lights-Out 100 Remote Management - Manual (Page 18)

18 HP ProLiant DL145 Lights-Out 100i Remote Management User Guide
2. Input the password as indicated, and click the Set button to save the changes.
Changing the password through the CLI
Passwords are case-sensitive and can contain up to 16 characters. To change the
user password through the CLI:
1. Log into the CLI as described in the "Logging in to the remote management
processor (on page 13 )" section.
2. At the command prompt, enter Changepassword.
3. Enter the current password when prompted.
4. Enter the new password when prompted.
5. Reenter the new password when prompted.