HP Lights-Out 100 Remote Management - Manual (Page 16)

16 HP ProLiant DL145 Lights-Out 100i Remote Management User Guide
Option Description
Monitoring Sensors Lists all sensor information, including
type, name, status, reading, and PEF
settings
System Event Log Displays the system event log
Network Settings Accesses the network parameter
settings screen
PET configuration Accesses the PET destinations and
alert policy table
User Management Accesses the user configuration
screen
CLI commands
CLI commands are entered at the command prompt that displays after a
successful login to the remote management processor. For more information on
logging in to the remote management processor, refer to the "Logging in to the
remote management processor (on page
13 )" section.
The following table lists and describes the CLI commands. The commands are
described in further detail in the following sections. Single letter abbreviations
can be used rather than the entire command word. For example, c can be used
rather than entering
Changepassword . CLI commands are not case-sensitive.
Command Action
C[hangePassword] Changes password for Administrator
account
P[ower] Displays the server power status
P[ower] off Powers off the server
I[pmicommand]
,
where data> is a
supported IPMI
command Executes an IPMI command
SEN[sorStatus] Displays the system sensor status