HP ProLiant DL380 G5 Server - Manual (Page 27)

Operations 27
6. Connect any required external cables to the expansion board. Refer to the documentation that ships
with the expansion board.
7. Power up the server (on page 23 ).
Access the product rear panel
Cable management arm with left-hand swing
To access the server rear panel, open the cable management arm.
Cable management arm with right-hand swing
NOTE: To access some components, you may need to remove the cable management arm.
To access the product rear panel components, open the cable management arm:
1. Power down the server (on page 23 ).
2. Swing open the cable management arm.
3. Remove the cables from the cable trough.