HP ProLiant DL785 G6 Server - Manual (Page 48)

2. Install the hard drive into the server. Be sure that the hard drive seats firmly into the connector
in the back of the drive cage.
3. Close the ejector lever.
4. Determine the status of the hard drive from the hot-plug hard drive LEDs, see “SAS and
SATA hard drive LEDs” (page 12) and “SAS and SATA hard drive LED combinations”
(page 12) .
Installing DVD or CD drive
The server is shipped with one DVD drive. You can install an optional DVD drive or CD drive.
To remove a DVD, CD drive or blank:
1.
Power down the server ( “Power down the server” (page 31) ).
2. Extend the server from the rack ( “Extending the server from the rack” (page 31) ).
3. Remove the access panel ( “Removing the access panel” (page 32) ).
48 Hardware options installations