HP StorageWorks 2.32 Edge Switch - Manual (Page 51)

HA-Fabric Manager user guide 51
3 Managing the HAFM application
This chapter provides instructions for managing and customizing the application.
• Accessing HAFM , page 51
• Managing users , page 51
• Managing user groups , page 56
• Discovering a SAN , page 59
• Configuring the SNMP agent , page 67
• Customizing the main window , page 69
Accessing HAFM
You can access HAFM two ways:
• Log in from a browser-capable PC connected through an Ethernet LAN segment.
• Log in remotely with an HAFM client application.
See ” Accessing HAFM ” on page 51, for log in instructions.
Adding and removing a network address
When you log in to the appliance, the network address that you enter is added to the network
address list on the Connect to HAFM dialog box.
To remove a network address from the list in the Connect to HAFM dialog box:
CAUTION: This procedure deletes the appliance from the network address list without prompting
you for a confirmation.
1. Turn on the HAFM appliance, or if the appliance is already turned on, double-click the HAFM
icon on the desktop.
The Connect to HAFM dialog box opens (
Figure 8 ).
2. Select the appliance you want to remove from the network address list.
The selected appliance’s IP address appears in the network address box.
3. Click Delete.
Managing users
To grant access to the HAFM application, the administrator can assign user names, passwords,
and access rights. Access rights are defined by the user groups as described in ” Managing user
groups ” on page 56.