HP CD52 External CD-Writer Series - Manual (Page 31)

NeroVision Express 2 Making your first DVD-Video, VCD, SVCD or miniDVD • 31
Use buffer underrun protection: When checked, buffer underrun protection is
enabled for this recording session to increase chances of a successful burn.
Please check this option if available.
Determine maximum speed: When checked, a speed test is performed before
recording to check if the recorder is able to write the session using the current
speed settings. In addition, it will also verify if all files selected for burning are
actually available.
Simulation: When checked, a simulation burn will be performed to check if the
disc is ready to be recorded. All actions of the burn process are performed, with
the exception that actually no data is written to the disc.
Write: When checked, the data is actually written to the disc after all tests have
passed successfully.
Step 9: When you are ready, click the 'Burn' button and begin to start the recording
process. Your project files will be converted to the appropriate format and then
burned to disc, burned as an image, or written to the hard disk, depending on what
you chose.
Step 10: When the burn process has finished click on 'Next' to enter the FINISH
page. There you have the option to burn your project again, start a new project,
make covers and labels, or exit the program.