HP Z1 Workstation - Manual (Page 25)

Installing the USB wireless dongle into the internal USB port
If you order a wireless keyboard and mouse, you can install the wireless dongle in the internal USB
port. See the following instructions:
1. Turn off the workstation, and then unplug the power cord from the grounded AC power outlet.
2. Holding the workstation firmly at the center of the top and bottom, maneuver the workstation into a
horizontal position.
Figure 3-11 Maneuver workstation to horizontal position
3. Slide the latches on the bottom of the workstation outward and open the chassis.
Figure 3-12 Open chassis
Setting up the workstation 17