HP Slate 2 Tablet PC - Manual (Page 22)

Using the digital pen (select models only)
To insert the battery in the pen:
1. Unscrew the cap from the pen.
2. Insert the battery in the pen (1).
3. Replace the cap on the pen (2).
4. Turn the cap in a clockwise direction (3) to tighten it.
The digital pen is now ready to use with your HP Slate. Simply touch the tip of the pen lightly on the
screen to write text or items on the screen. To perform a right-click action, press the button on the
side of the pen when selecting an item on the screen.
The digital pen uses inherent pressure sensitivity, so you can create a bolder stroke by pressing
harder on the screen with the digital pen. Pressure sensitivity may not be supported in all programs.
To calibrate the pen and change pen settings, such as pen sensitivity, tap Start, tap Control Panel,
tap Hardware and Sound, tap N-trig DuoSense Digitizer Settings, and then follow the on-screen
instructions.
NOTE: For regulatory and safety information, refer to the Regulatory, Safety, and Environmental
Notices on the HP Slate. Tap Start, tap Help and Support, and then tap User Guides.
12 Chapter 2 Getting to know your Slate