HP StorageWorks XP Remote Web Console Software - Manual (Page 28)

If you select an option with a limited license capacity, the Setting box looks like Figure 14 . You may
enter the licensed capacity to be allocated to the SLPR.
However, you cannot set the licensed capacity of SLPR0. If you select SLPR0, Set will be inactive.
Figure 14 Setting Box (License Capacity Limited)
.
Table 10 Setting Box Details (License Capacity Limited)
Description Item
Selects the setting. The selected row of the option list and the Partition Status list change
to blue bold italics, and the displayed capacity in the Remaining Capacity field changes
to the new capacity.
IMPORTANT:
The setting is not implemented until you click Apply (below).
Set
Implements the setting in the storage system. Apply
Cancels the setting. Cancel
Using the XP Disk/Cache Partition GUI 28