Event settings, 6-1 overview, 6-2 description – HP Integrity NonStop J-Series User Manual
Page 31: 6 event settings, Figure 20 event screen, Overview
Pocket ViewPoint User Guide H02 – 545765-002
- 31 -
3-6-1
3-6 Event Settings
Overview
Here you can specify criteria to limit which events are displayed.
Figure 21 Event Screen
3-6-2 Description
Following parameters are available:
Collector - Select the name of an EMS collector process from which Events should be displayed
using the dropdown menu. By default, Pocket ViewPoint selects $0 from the Server to which you are
connected.
Show - The user can specify different filter criteria for the events to be displayed.
Selecting
All causes all the events to be shown
Selecting
“Only” causes all the events that match the criteria specified in the “Selected”
box to be shown.
Selecting
“Except” causes all the events that match the criteria specified in the “Selected”
box NOT to be shown.
Selecting “Only” or “ or “Except” shows the Owner and Subsystem list boxes using which the user can
specify which Owner – Subsystem combinations to include or exclude. The Selected list box lists the
specified Owner – Subsystems which will use in the filtering of events. Tap on “Select” to add to the
Selected list and “Remove” to remove from the “Selected” list.
(Note: New Owner-Subsystem can be added through Web ViewPoint