HP Integrity NonStop H-Series - Manual (Page 17)

Getting Started
ViewSys User’s Guide— 526358-002
1 -3
Average Mode
Average Mode
1. Pressing the ROLL DOWN function key two times will switch the utility environment
to Average mode. In this mode, statistics are incremented when the average usage
increases since ViewSys has been running.
2. Press the INS LINE function key to reset the averages for all resources to the
current poll period values. Resource values are incremented whenever a new
average use is encountered.
These average values are maintained regardless of the display mode selected, so you
can view current values for an hour and then select the average mode to see the
average resource use since the values were last initialized.
When you press the NEXT PAGE function key, ViewSys rotates from display to display
until the next time you press that function key. At that point, the currently selected
display will continuously be updated and displayed. Rotation is toggled from state to
state by subsequent function key commands.
Exiting ViewSys
To exit ViewSys, press SHIFT-INS LINE or F16 .