HP Integrity NonStop H-Series - Manual (Page 23)

ViewSys User’s Guide— 526358-002
3 -1
3
ViewSys Run Command Syntax
ViewSys is run from TACL on an HP block mode terminal or from a workstation running
a terminal emulation program. The run command syntax for the program follows.
You can also execute some run commands with a function key. See the commands
with the notation **
FKEYS **.
Run Command
The ViewSys syntax follows:
run-option is one of:
NAME [ $process-name ]
CPU cpu-number
PRI priority
NAME [ $process-name ]
if present, is the symbolic process name to be given the ViewSys process. The
NAME parameter is required if ViewSys will run with a backup process.
CPU cpu-number
if present, specifies the processor where the ViewSys process is to execute.
PRI priority
if present, specifies the execution priority of the ViewSys process. To ensure
proper operation, run ViewSys a priority higher than the priorities of application
processes.
command
is one of the options listed in Table 3-1 on page 3-1.
Startup Commands
A complete description of each startup command option follows Table 3-1 .
VIEWSYS [ / run-option [ , run-option ] . . . / ]
[ command [ ; command ] . . . ]
Table 3-1. Startup Command Options (page 1 of 2)
Backupcpu Exitkey Rotation
Cpusets Functionkeys Screen
Csvfile Help Switchback