HP Integrity NonStop H-Series - Manual (Page 30)

ViewSys Run Command Syntax
ViewSys User’s Guide— 526358-002
3 -8
ROTATION Command
OFF
indicates that when the ALLCPUS display type is selected, the current CPU set is
displayed repeatedly. To select the next CPU set in sequence, pressing the PREV
PAGE function key.
Example
VIEWSYS CPUSETS 2; ROTATECPUS ON
ROTATION Command
Use the ROTATION command to specify that ViewSys should rotate sequentially
through display types, both individual entities and CPU sets.
ON
indicates that ViewSys will rotate sequentially through all the display types, both
individual entities and CPU sets.
OFF
indicates that ViewSys will repeatedly display the currently selected display. If the
ALLCPUS set display is selected, the setting of the ROTATECPUS variable is
tested to determine if ViewSys will rotate from CPU set to CPU set. This is the
default.
Example
VIEWSYS ROTATION ON
Note. To toggle ROTATECPUS interactively, press the PREV PAGE function key.
ROTATION { ON | OFF } ** FKEYS **
Note. To toggle ROTATION interactively, press the NEXT PAGE function key.