HP 2000SA G2-Modular-Smart-Array - Manual (Page 24)

Create user account in the MSA device
Description Creates a Manage/Monitor user account in the MSA device. This command
is invoked from the PSM MANAGE prompt.
Syntax create
Prompts User login details necessary to create new user account if not yet entered
in this session. Then prompts for all the input parameters required to create
a new user account – username, password, account level, account type and
interfaces. Enter nothing to consider the default values.
The default values are:
• User Account Level: monitor
• User Account Type: advanced
• Interfaces: cli and wbi
Output On success, acknowledges the creation of the user account as shown in
Figure 12 , page 24.
On failure, displays the error message with possible cause.
If the login fails, the correct user login details must be entered again while
re-issuing the command. Otherwise, the user login details are not required
to be entered for the remainder of the current ‘PSM Manage’ session.
Figure 12 Output of create user account command
.
Configuring the Proxy Provider 24