HP Scanjet N7710 Document Sheet-feed Scanner - Manual (Page 18)

4 Scan and copy
The following topics describe how to scan or copy originals using the scanner and the
scanner software.
• Basic scanning steps
• Basic copying steps
• Scan from the scanner buttons
• Scan from HP Smart Document Scan Software
• Scan from other software programs
• Scan with one button press
Basic scanning steps
The basic steps for scanning are:
1. Load the originals. For more information, see
Use the document feeder .
2. Do one of the following:
•
Use the Select Profile Number ( ) button on the scanner front panel to select a
number, and then press the Scan Document To ( ) button.
For information about profiles, see
Set up scan profiles .
• Open HP Smart Document Scan Software. For more information, see Scan from
HP Smart Document Scan Software .
• Open another scanning software program. For more information, see Scan from
other software programs .
TIP: If you select duplex scanning or copying, the scanner processes both sides of
a two-sided original in a single pass.
Basic copying steps
The basic steps for copying are:
1. Load the originals. For more information, see
Use the document feeder .
2. Use the Number of Copies ( ) button on the scanner front panel to select the number
of copies, and then press the Copy ( ) button.
The copies are printed with the current copy settings.
NOTE: If you want to change the copy settings, start the copy from the HP Document
Copy software.
TIP: You can configure HP Document Copy to always prompt for copy settings
before starting to print. For information, see the HP Scanner Tools Utility help.
16 Scan and copy