Mouse -5 – HP ProLiant BL20p G3 Server Blade User Manual

Page 83

Text mode
Original mode

Connecting Local I/O Devices

Directly Accessing a Configured Server Blade with Local
Keyboard, Video, and Mouse

CAUTION: Disconnect the local I/O cable from the port when not in use. The port
and connector do not provide a permanent connection. Rear iLO connector
performance degrades when the local I/O cable is in use, even when the iLO
connector on the cable is not in use.

NOTE: For this setup, a hub is not necessary to connect directly to the blade. If you need
additional connections, use the second setup.

1. Connect the video connector to a monitor (1).

2. Connect a USB mouse to the USB connector (2).

3. Connect a USB keyboard to the USB connector (3).

4. Connect the local I/O cable to the server blade (4).

Figure 6-3: Directly accessing a server blade with
keyboard, video, and mouse

HP ProLiant BL20p Generation 3 Server Blade User Guide

6-5