HP ProLiant BL20p G3 Server Blade - Manual (Page 19)

Server Blade Component Identification
System Maintenance Switch
The system maintenance switch (SW2) is an eight-position switch that implements
protection and override functions. The default position is off. For the proper system
maintenance switch settings, refer to Table 1-4 or refer to the labels attached to the
inside of the server access panel.
Table 1-4: System Maintenance Switch (SW2) Settings
Position Description On/Off Function
1 iLO Security
Override
Off = iLO Security is enabled.
On = Overrides iLO security function.
2 Configuration
lock
Off = System configuration can be modified.
On = System configuration is locked and
cannot be modified.
3 Reserved The default is OFF.
4 Reserved The default is OFF.
5 Password
Disable
Off = Power-on password is enabled.
On = Power-on password is disabled.
6 Reset
Configuration
Off = Normal.
On = ROM treats the system configuration
as invalid.
7 Reserved The default is OFF.
8 Reserved The default is OFF.
System Settings Switch
The system settings switch (SW1) is a four-position switch with all four settings
reserved. The default setting for all four positions is off.
1-8 HP ProLiant BL20p Generation 3 Server Blade User Guide