HP ProLiant DL380 G7 Server - Manual (Page 67)

Hardware options installation 67
CAUTION: Any attempt to remove an installed TPM from the system board breaks or disfigures
the TPM security rivet. Upon locating a broken or disfigured rivet on an installed TPM,
administrators should consider the system compromised and take appropriate measures to ensure
the integrity of the system data.
8. Install the TPM board. Press down on the connector to seat the board.
9. Install the TPM security rivet by pressing the rivet firmly into the system board.
10.
11. Install the air baffle.
12. Install the PCI riser cage (on page 29 ).
13. Install the full-length expansion board retainer (on page 30 ) if any full-length expansion boards are
installed.
14. Install the access panel (on page 26 ).
15. Install the server into the rack (" Installing the server into the rack " on page 35 ).
16. Power up the server (on page 24 ).