HP ProLiant DL380 G7 Server - Manual (Page 63)

Hardware options installation 63
7. Connect any required internal or external cables to the expansion board. See the documentation that
ships with the expansion board.
8. Install the PCI riser cage (on page 29 ).
9. Install the full-length expansion board retainer (on page 30 ).
10. Install the access panel (on page 26 ).
PCI riser board option
CAUTION: For proper cooling do not operate the server without the access panel, baffles,
expansion slot covers, or blanks installed. If the server supports hot-plug components, minimize
the amount of time the access panel is open.
1. Power down the server (on page 24 ).
2. Extend the server from the rack (on page 24 ).
3. Remove the access panel (on page 25 ).
4. Remove the full-length expansion board retainer (on page 28 ) if any full-length expansion boards are
installed.
5. Remove the PCI riser cage (on page 29 ).
6. Install the optional riser board.
7. Install any expansion boards. (" Expansion board options " on page 60 )
8. Install the PCI riser cage (on page 29 ).
9. Install the full-length expansion board retainer (on page 30 ) if any full-length expansion boards are
installed.
10. Install the access panel (on page 26 ).
11. Install the server into the rack.
12. Power up the server (on page 24 ).