HP ProLiant DL380 G7 Server - Manual (Page 15)

Component identification 15
Item Description
18 SAS connector A
19 SAS connector B
20 Cache module connector
21 Fan connector 1
22 Fan connector 2
23 Fan connector 3
24 Fan connector 4
25 Fan connector 5
26 Fan connector 6
System maintenance switch
Position Default Function
S1 Off Off = iLO 3 security is enabled.
On = iLO 3 security is disabled.
S2
Off Off = System configuration can be
changed.
On = System configuration is locked.
S3 Off Reserved
S4 Off Reserved
S5 Off Off = Power-on password is enabled.
On = Power-on password is disabled.
S6 Off Off = No function
On = Clear NVRAM
S7 — Reserved
S8 — Reserved
S9 — Reserved
S10 — Reserved
When the system maintenance switch position 6 is set to the On position, the system is prepared to erase all
system configuration settings from both CMOS and NVRAM.
CAUTION: Clearing CMOS and/or NVRAM deletes configuration information. Be sure to
properly configure the server or data loss could occur.
NMI functionality
An NMI crash dump enables administrators to create crash dump files when a system is hung and not
responding to traditional debug mechanisms.
Crash dump log analysis is an essential part of diagnosing reliability problems, such as hangs in operating
systems, device drivers, and applications. Many crashes freeze a system, and the only available action for
administrators is to cycle the system power. Resetting the system erases any information that could support