To turn on the autosend feature – HP Laserjet p3010 User Manual
Page 42

To turn on the AutoSend feature
Use the following procedure to make the AutoSend feature available.
1.
Make outgoing e-mail functions available by following the instructions listed in this chapter. (For
more information, see
2.
Select the Enable AutoSend check box.
3.
Click an option to specify the interval at which you want the product to send the product-
configuration and supplies-usage information to the e-mail recipients (determined in the next step),
and then type the number of days, weeks, months, or pages printed.
4.
Configure up to twenty destinations (with a hard drive installed) using the format that displays on
the screen.
5.
To send device configuration and supplies status information to HP, select the Send to HP check
box.
6.
Click Apply.
32
Chapter 3 Configuring the product from the Settings screens
ENWW