HP Laserjet p3010 - Manual (Page 35)

NOTE: For information about configuring the return e-mail address for the device, see
Configuring the return e-mail address on page 25 .
5. If the SMTP server requires authentication, select the Enable SMTP Authentication check box
and type the username and password (optional).
6. Click Apply to save the changes.
Configuring the return e-mail address
When you configure the return e-mail address on the E-mail Server page, you are configuring the
identity of the product. For example, if you type [email protected] in the Return E-mail
Address field, all e-mails sent out by the product will come from [email protected] In this
example, the identity of the product is: [email protected]
ENWW E-mail Server 25