HP Laserjet p3010 - Manual (Page 18)

Device Status
Use the Device Status screen to view the current status of the product. The following illustration and
table describe how to use this screen.
Figure 2-1 Device Status screen
1
2
3
4
5
6
7
Table 2-1 Device Status
Callout Area on the screen Information or capability that the area provides
1 HP EWS tabs and
menus For more information, see Navigating through the HP Embedded Web Server
on page 4 .
2 Status Shows the device status (the same information that displays on the control-panel
display).
3 Control-panel buttons Use these control-panel buttons as you would at the product. To select which
control-panel buttons appear on this screen, see the Security screen on the
Settings tab.
4 Supplies Shows the approximate percentage of life remaining for each supply.
5 Supplies Details Opens the Supplies Status Page screen, where you can view information about
product supplies.
6 Media Shows the status and configuration information for the input trays and output bins.
The media status is OK until the tray is completely empty. When the tray is empty,
the status is Empty.
7 Change Settings Opens the Other Settings screen, where you can change the paper-type settings.
8 Chapter 2 Viewing product status from the HP EWS Information screens ENWW